PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6481-354122-1
6481-354122-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include color: BLACK, material: RUBBER SYNTHETIC, overall_height: 0.500 INCHES NOMINAL IN, groove_diameter: 0.203 INCHES NOMINAL IN, special_features: 1/16 IN. W OF GROOVE IN, style_designator: DOUBLE FLANGE.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-6843, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6481-354122-1
NSN: 5340-00-598-6843
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
colorBLACK
materialRUBBER SYNTHETIC
overall_height0.500 INCHES NOMINAL IN
groove_diameter0.203 INCHES NOMINAL IN
special_features1/16 IN. W OF GROOVE IN
style_designatorDOUBLE FLANGE
bottom_flange_width0.219 INCHES NOMINAL IN
bottom_flange_diameter0.250 INCHES NOMINAL IN
outside/top_flange_diameter0.250 INCHES NOMINAL IN
NSN5340-00-598-6843
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6481-354122-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 0.250 INCHES NOMINAL IN
•
BOTTOM FLANGE DIAMETER: 0.250 INCHES NOMINAL IN
•
COLOR: BLACK
•
STYLE DESIGNATOR: DOUBLE FLANGE
•
MATERIAL: RUBBER SYNTHETIC
•
BOTTOM FLANGE WIDTH: 0.219 INCHES NOMINAL IN
•
GROOVE DIAMETER: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE/TOP FLANGE DIAMETER0.250 INCHES NOMINAL IN
SPECIAL FEATURES1/16 IN. W OF GROOVE IN
BOTTOM FLANGE DIAMETER0.250 INCHES NOMINAL IN
COLORBLACK
STYLE DESIGNATORDOUBLE FLANGE
MATERIALRUBBER SYNTHETIC
BOTTOM FLANGE WIDTH0.219 INCHES NOMINAL IN
GROOVE DIAMETER0.203 INCHES NOMINAL IN
OVERALL HEIGHT0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
286-8721Upgraded Successor
successor cross-reference
successor
1332Upgraded Successor
successor cross-reference
successor
CL50Upgraded Successor
successor cross-reference
successor
11640398-2Upgraded Successor
successor cross-reference
successor
2590004982387Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6481-354122-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6481-354122-1?
6481-354122-1 is a BUMPER.
What parts can replace 6481-354122-1?
There are 5 known substitutes for 6481-354122-1: 286-8721, 1332, CL50 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6481-354122-1?
6481-354122-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-6843. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6481-354122-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026