PartsTable
Technical Data Sheet
PartsTable / MRO / CK70AX471M
CK70AX471M ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include body_style: W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS, body_length: 0.750 INCHES NOMINAL IN, width_across_flats: 0.312 INCHES NOMINAL IN, reliability_indicator: NOT ESTABLISHED, nonderated_operating_temp: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC, terminal_surface_treatment: SOLDER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-852-7099, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CK70AX471M
NSN: 5910-00-852-7099
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleW/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
body_length0.750 INCHES NOMINAL IN
width_across_flats0.312 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 WIRE HOOK/LOOP
specification/standard_data81349-MIL-C-11015/13 GOVERNMENT SPECIFICATION
tolerance_range_per_section-10.00 TO 10.00 PERCENT SINGLE SECTION
schematic_diagram_designatorFEEDTHROUGH
capacitance_value_per_section470.000 PICOFARADS SINGLE SECTION
mounting_facility_type_and_quantity1 THREADED BUSHING
NSN5910-00-852-7099
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN CK70AX471M MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE: -25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
•
MOUNTING FACILITY TYPE AND QUANTITY: 1 THREADED BUSHING
•
TOLERANCE RANGE PER SECTION: -10.00 TO 10.00 PERCENT SINGLE SECTION
•
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION: 500.0 DC SINGLE SECTION
•
NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
•
CAPACITANCE VALUE PER SECTION: 470.000 PICOFARADS SINGLE SECTION
•
INSULATION RESISTANCE AT REFERENCE TEMP: 20000.0 MEGOHMS
•
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT: 1.500
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE-25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
MOUNTING FACILITY TYPE AND QUANTITY1 THREADED BUSHING
TOLERANCE RANGE PER SECTION-10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION500.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
CAPACITANCE VALUE PER SECTION470.000 PICOFARADS SINGLE SECTION
INSULATION RESISTANCE AT REFERENCE TEMP20000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT1.500
TERMINAL SURFACE TREATMENTSOLDER
TEST DATA DOCUMENT81349-MIL-C-11015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
707651-01Interchangeable
interchangeable cross-reference
interchangeable
CK70AX681KInterchangeable
interchangeable cross-reference
interchangeable
MIL-C-11015/13Interchangeable
interchangeable cross-reference
interchangeable
327-010-680KInterchangeable
interchangeable cross-reference
interchangeable
MILC11015-13BInterchangeable
interchangeable cross-reference
interchangeable
327-029X5T0102ZInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CK70AX471M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CK70AX471M?
CK70AX471M is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace CK70AX471M?
There are 23 known substitutes for CK70AX471M: 707651-01, CK70AX681K, MIL-C-11015/13 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CK70AX471M?
CK70AX471M is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-852-7099. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CK70AX471M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026