PartsTable
Technical Data Sheet
PartsTable / MRO / 707651-01
707651-01 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS, body_length: 0.750 INCHES NOMINAL IN, width_across_flats: 0.312 INCHES NOMINAL IN, reliability_indicator: NOT ESTABLISHED, nonderated_operating_temp: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-723-6876, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 707651-01
NSN: 5910-00-723-6876
FSC: 5910
CAGE: 09017 — EDO (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
body_length0.750 INCHES NOMINAL IN
width_across_flats0.312 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 WIRE HOOK/LOOP
tolerance_range_per_section-10.00 TO 10.00 PERCENT SINGLE SECTION
schematic_diagram_designatorFEEDTHROUGH
capacitance_value_per_section680.000 PICOFARADS SINGLE SECTION
mounting_facility_type_and_quantity1 THREADED BUSHING
NSN5910-00-723-6876
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN 707651-01 MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT: 1.5000
•
TERMINAL SURFACE TREATMENT: SOLDER
•
INSULATION RESISTANCE AT REFERENCE TEMP: 10000.0 MEGOHMS
•
MATERIAL: PLASTIC CASE
•
TERMINAL TYPE AND QUANTITY: 2 WIRE HOOK/LOOP
•
SCHEMATIC DIAGRAM DESIGNATOR: FEEDTHROUGH
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
TEST DATA DOCUMENT: 81349-MILC11015-13 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT1.5000
TERMINAL SURFACE TREATMENTSOLDER
INSULATION RESISTANCE AT REFERENCE TEMP10000.0 MEGOHMS
MATERIALPLASTIC CASE
TERMINAL TYPE AND QUANTITY2 WIRE HOOK/LOOP
SCHEMATIC DIAGRAM DESIGNATORFEEDTHROUGH
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
TEST DATA DOCUMENT81349-MILC11015-13 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BODY LENGTH0.750 INCHES NOMINAL IN
BODY STYLEW/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
327-010-680KInterchangeable
interchangeable cross-reference
interchangeable
MIL-C-11015/13Interchangeable
interchangeable cross-reference
interchangeable
MILC11015-13BInterchangeable
interchangeable cross-reference
interchangeable
327-029X5T0102ZInterchangeable
interchangeable cross-reference
interchangeable
516-0235-000Interchangeable
interchangeable cross-reference
interchangeable
GP2-327-1000UUFPORM 20PCTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 707651-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 707651-01?
707651-01 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 707651-01?
There are 22 known substitutes for 707651-01: 327-010-680K, MIL-C-11015/13, MILC11015-13B and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 707651-01?
707651-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-723-6876. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 707651-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026