PartsTable / COMPONENT / CH8M
CH8M
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-337-8642, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
CH8M
NSN: 5340-00-337-8642 FSC: 5340 CAGE: 1NJK8 — BURNDY LLC (USA)
SPECIFICATIONS
diameter 0.173 INCHES NOMINAL IN material PLASTIC POLYAMIDE NYLON BAND overall_width 0.375 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.050 INCHES NOMINAL IN loop_inside_diameter 0.563 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.781 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.593 INCHES NOMINAL IN NSN 5340-00-337-8642
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: CH8M
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• TONGUE HOLE TYPE: ROUND, UNTHREADED
• MATERIAL: PLASTIC POLYAMIDE NYLON BAND
• STYLE DESIGNATOR: SINGLE LOOP
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.781 INCHES NOMINAL IN
• DIAMETER: 0.173 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.593 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPE ROUND, UNTHREADED MATERIAL PLASTIC POLYAMIDE NYLON BAND STYLE DESIGNATOR SINGLE LOOP DISTANCE FROM LOOP CENTER TO TONGUE END 0.781 INCHES NOMINAL IN OVERALL WIDTH 0.375 INCHES NOMINAL IN DIAMETER 0.173 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.593 INCHES NOMINAL IN MATERIAL THICKNESS 0.050 INCHES NOMINAL IN LOOP INSIDE DIAMETER 0.563 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
HP8N Upgraded Successor successor cross-reference
successor
99024233 Upgraded Successor successor cross-reference
successor
672B452P7 Upgraded Successor successor cross-reference
successor
710876-9 Upgraded Successor successor cross-reference
successor
HP-9N Upgraded Successor successor cross-reference
successor
CP30-1-11-8A Upgraded Successor successor cross-reference
successor
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy CH8M?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CH8M?
CH8M is a CLAMP,LOOP.
What parts can replace CH8M?
There are 24 known substitutes for CH8M: HP8N, 99024233, 672B452P7 and 21 more. Substitute compatibility should be verified for your specific system.
Is CH8M still available?
CH8M is currently cancelled.