PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CP30-1-11-8A
CP30-1-11-8A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.380 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.045 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-530-6832, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CP30-1-11-8A
NSN: 5340-00-530-6832
FSC: 5340
CAGE: 25500 — LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV ROTARY AND MISSION SYSTEMS (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.380 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.045 INCHES NOMINAL IN
loop_inside_diameter0.470 INCHES NOMINAL IN
material_document_and_classificationE. I. DUPONT DENEMOUR AND CO INC,TY RM-10001 OR TY 101 MFR REF SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.750 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.560 INCHES NOMINAL IN
NSN5340-00-530-6832
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CP30-1-11-8A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.470 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: E. I. DUPONT DENEMOUR AND CO INC,TY RM-10001 OR TY 101 MFR REF SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.045 INCHES NOMINAL IN
•
DIAMETER: 0.199 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.380 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.470 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYAMIDE NYLON BAND
MATERIAL DOCUMENT AND CLASSIFICATIONE. I. DUPONT DENEMOUR AND CO INC,TY RM-10001 OR TY 101 MFR REF SINGLE MATERIAL RESPONSE BAND
MATERIAL THICKNESS0.045 INCHES NOMINAL IN
DIAMETER0.199 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.750 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.560 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
8177337Upgraded Successor
successor cross-reference
successor
7432493P8Upgraded Successor
successor cross-reference
successor
10607442-1Upgraded Successor
successor cross-reference
successor
1-2-4T140Upgraded Successor
successor cross-reference
successor
NPC8Upgraded Successor
successor cross-reference
successor
777Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CP30-1-11-8A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CP30-1-11-8A?
CP30-1-11-8A is a CLAMP,LOOP.
What parts can replace CP30-1-11-8A?
There are 11 known substitutes for CP30-1-11-8A: 8177337, 7432493P8, 10607442-1 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CP30-1-11-8A?
CP30-1-11-8A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-530-6832. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CP30-1-11-8A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026