CH05A3NC104K — CAPACITOR,FIXED,METALLIZED,PAPER

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

CH05A3NC104K: CAPACITOR,FIXED,METALLIZED,PAPER.

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.843 INCHES NOMINAL IN, body_diameter: 0.375 INCHES NOMINAL IN, terminal_length: 1.625 INCHES MINIMUM IN, features_provided: HERMETICALLY SEALED CASE, terminal_diameter: 0.025 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-00-477-7721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ CH05A3NC104K

NSN: 5910-00-477-7721
NIINs: 004777721, 008344650
FSC: 5910 — Capacitors
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	W/O MTG FACILITIES, AXIAL TERMINALS
body_length	0.843 INCHES NOMINAL IN
body_diameter	0.375 INCHES NOMINAL IN
terminal_length	1.625 INCHES MINIMUM IN
features_provided	HERMETICALLY SEALED CASE
terminal_diameter	0.025 INCHES NOMINAL IN
reliability_indicator	NOT ESTABLISHED
case_insulation_material	PLASTIC
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
specification/standard_data	81349-MIL-C-18312B GOVERNMENT SPECIFICATION
NSN	5910-00-477-7721

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 0.344 INCHES NOMINAL IN

•

TERMINAL DIAMETER: 0.025 INCHES NOMINAL IN

•

BODY STYLE: W/O MTG FACILITIES, AXIAL TERMINALS

•

TOLERANCE RANGE PER SECTION: -10.00 TO 10.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.625 INCHES MINIMUM IN

•

RELIABILITY FAILURE RATE LEVEL IN PERCENT: 0.1000

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

BODY DIAMETER	0.344 INCHES NOMINAL IN
TERMINAL DIAMETER	0.025 INCHES NOMINAL IN
BODY STYLE	W/O MTG FACILITIES, AXIAL TERMINALS
TOLERANCE RANGE PER SECTION	-10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.625 INCHES MINIMUM IN
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.1000
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	200.0 DC SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATOR	ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL

SUBSTITUTES & CROSS-REFERENCES 8

118P10492S3Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

M39022/01-1143Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

118P10402S3Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

M39022/01-1403Reference document

Same NSN cross-reference

Reference document — Secondary reference

118P10402S1Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MILC39022-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy CH05A3NC104K?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CH05A3NC104K?

CH05A3NC104K is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).

What parts can replace CH05A3NC104K?

There are 8 known substitutes for CH05A3NC104K: 118P10492S3, M39022/01-1143, 118P10402S3 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for CH05A3NC104K?

CH05A3NC104K is cataloged in the U.S. Government catalog under NSN 5910-00-477-7721. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CH05A3NC104K — CAPACITOR,FIXED,METALLIZED,PAPER

Request a Quote — CH05A3NC104K