118P10492S3 — CAPACITOR,FIXED,METALLIZED,PAPER

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

118P10492S3: CAPACITOR,FIXED,METALLIZED,PAPER.

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.843 INCHES NOMINAL IN, body_diameter: 0.344 INCHES NOMINAL IN, terminal_length: 1.625 INCHES MINIMUM IN, terminal_diameter: 0.025 INCHES NOMINAL IN, reliability_indicator: ESTABLISHED. This part is cataloged in the U.S.

Government catalog under NSN 5910-00-477-7721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 118P10492S3

NSN: 5910-00-477-7721
FSC: 5910 — Capacitors
CAGE: 01884 — EXXELIA USA, INC. (USA)

SPECIFICATIONS

body_style	W/O MTG FACILITIES, AXIAL TERMINALS
body_length	0.843 INCHES NOMINAL IN
body_diameter	0.344 INCHES NOMINAL IN
terminal_length	1.625 INCHES MINIMUM IN
terminal_diameter	0.025 INCHES NOMINAL IN
reliability_indicator	ESTABLISHED
case_insulation_material	PLASTIC
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
specification/standard_data	81349-MIL-C-39022/1 GOVERNMENT SPECIFICATION
tolerance_range_per_section	-10.00 TO 10.00 PERCENT SINGLE SECTION
NSN	5910-00-477-7721

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 0.344 INCHES NOMINAL IN

•

TERMINAL DIAMETER: 0.025 INCHES NOMINAL IN

•

BODY STYLE: W/O MTG FACILITIES, AXIAL TERMINALS

•

TOLERANCE RANGE PER SECTION: -10.00 TO 10.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.625 INCHES MINIMUM IN

•

RELIABILITY FAILURE RATE LEVEL IN PERCENT: 0.1000

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

BODY DIAMETER	0.344 INCHES NOMINAL IN
TERMINAL DIAMETER	0.025 INCHES NOMINAL IN
BODY STYLE	W/O MTG FACILITIES, AXIAL TERMINALS
TOLERANCE RANGE PER SECTION	-10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.625 INCHES MINIMUM IN
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.1000
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	200.0 DC SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATOR	ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL

SUBSTITUTES & CROSS-REFERENCES 8

M39022/01-1143Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

118P10402S3Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

M39022/01-1403Reference document

Same NSN cross-reference

Reference document — Secondary reference

118P10402S1Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

CH05A3NC104KReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MILC39022-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 118P10492S3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 118P10492S3?

118P10492S3 is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).

What parts can replace 118P10492S3?

There are 8 known substitutes for 118P10492S3: M39022/01-1143, 118P10402S3, M39022/01-1403 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 118P10492S3?

118P10492S3 is cataloged in the U.S. Government catalog under NSN 5910-00-477-7721. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

118P10492S3 — CAPACITOR,FIXED,METALLIZED,PAPER

Request a Quote — 118P10492S3