The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, body_height: 0.045 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN, body_length: 0.390 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/TOTEM POLE OUTPUT, output_logic_form: TRANSISTOR-TRANSISTOR LOGIC, inclosure_material: CERAMIC AND GLASS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-00-326-0250, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| body_width | 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| body_height | 0.045 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN |
| body_length | 0.390 INCHES MAXIMUM IN |
| features_provided | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/TOTEM POLE OUTPUT |
| output_logic_form | TRANSISTOR-TRANSISTOR LOGIC |
| inclosure_material | CERAMIC AND GLASS |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| operating_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| input_circuit_pattern | DUAL 2 WIDE 2 INPUT |
| inclosure_configuration | FLAT PACK |
| terminal_surface_treatment | SOLDER |
| terminal_type_and_quantity | 14 FLAT LEADS |
| NSN | 5962-00-326-0250 |
| INPUT CIRCUIT PATTERN | DUAL 2 WIDE 2 INPUT |
| MAXIMUM POWER DISSIPATION RATING | 306.0 MILLIWATTS |
| FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/TOTEM POLE OUTPUT |
| BODY LENGTH | 0.390 INCHES MAXIMUM IN |
| TIME RATING PER CHACTERISTIC | 3.00 NANOSECONDS MINIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 30.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 3.00 NANOSECONDS MINIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT AND 24.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT NS |
| INCLOSURE CONFIGURATION | FLAT PACK |
| TEST DATA DOCUMENT | 81349-MIL-M-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -1.5 VOLTS MINIMUM POWER SOURCE AND 5.5 VOLTS MAXIMUM POWER SOURCE |
| CASE OUTLINE SOURCE AND DESIGNATOR | F-2 MIL-M-38510 |
| OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS DEGC |