PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CA28096-3B-7S
CA28096-3B-7S ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.183 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN, thread_length: 0.309 INCHES MINIMUM AND 0.339 INCHES MAXIMUM IN, fastener_length: 1.187 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-180-6615, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CA28096-3B-7S
NSN: 5305-01-180-6615
FSC: 5305
CAGE: 29372 — HOWMET GLOBAL FASTENING SYSTEMS INC. DIV TRIDAIR PRODUCTS (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.183 INCHES NOMINAL IN
thread_class3A A
head_diameter0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
thread_length0.309 INCHES MINIMUM AND 0.339 INCHES MAXIMUM IN
fastener_length1.187 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentOXIDE STAND-OFF
internal_drive_styleSLOT
minimum_yield_strength95000 POUNDS PER SQUARE INCH LBS
nominal_thread_diameter0.312 INCHES IN
minimum_tensile_strength140000 POUNDS PER SQUARE INCH LBS
NSN5305-01-180-6615
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: CA28096-3B-7S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL ACCOMMODATED THICKNESS: 0.275 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
•
SURFACE TREATMENT: OXIDE FASTENER
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 FASTENER
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL ACCOMMODATED THICKNESS0.275 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENTOXIDE FASTENER
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 STAND-OFF
SURFACE TREATMENTPASSIVATE SPRING
MATERIALSTEEL COMP 302 SPRING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
24-50-51Interchangeable
interchangeable cross-reference
interchangeable
24-50Interchangeable
interchangeable cross-reference
interchangeable
24-51Interchangeable
interchangeable cross-reference
interchangeable
SM-B-391468Interchangeable
interchangeable cross-reference
interchangeable
MC6Interchangeable
interchangeable cross-reference
interchangeable
151-003-D-111-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CA28096-3B-7S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CA28096-3B-7S?
CA28096-3B-7S is a SCREW ASSEMBLY,PANEL.
What parts can replace CA28096-3B-7S?
There are 13 known substitutes for CA28096-3B-7S: 24-50-51, 24-50, 24-51 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CA28096-3B-7S?
CA28096-3B-7S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-180-6615. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CA28096-3B-7S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026