PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 24-50-51
24-50-51 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RADOME is a the manufacturer industrial component. Key specifications include length: 70.0 MILLIMETERS NOMINAL MM, material: STEEL CORROSION RESISTING OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, hole_diameter: 0.313 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-185-0578, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24-50-51
NSN: 5330-00-185-0578
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
length70.0 MILLIMETERS NOMINAL MM
materialSTEEL CORROSION RESISTING OVERALL
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
hole_diameter0.313 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
hole_quantity5
overall_length3.485 INCHES MINIMUM AND 4.515 INCHES MAXIMUM IN
pitch_diameter2.1667 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity52
outside_diameter4.125 INCHES NOMINAL IN
NSN5330-00-185-0578
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24-50-51 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
HOLE DIAMETER: 0.313 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT CIRCLE DIAMETER: 2.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 4.125 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.313 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT CIRCLE DIAMETER2.875 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER4.125 INCHES NOMINAL IN
APERTURE DIAMETER2.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
2451Interchangeable
interchangeable cross-reference
interchangeable
SM-B-391468Interchangeable
interchangeable cross-reference
interchangeable
MC6Interchangeable
interchangeable cross-reference
interchangeable
151-003-D-111-7Interchangeable
interchangeable cross-reference
interchangeable
A-A-1925Interchangeable
interchangeable cross-reference
interchangeable
FF-S-325Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24-50-51?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24-50-51?
24-50-51 is a RADOME.
What parts can replace 24-50-51?
There are 14 known substitutes for 24-50-51: 2451, SM-B-391468, MC6 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24-50-51?
24-50-51 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-185-0578. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24-50-51

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026