PartsTable
Technical Data Sheet
Download PDF

CA1376-6-2-10 — FASTENER,FLARE LOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CA1376-6-2-10: FASTENER,FLARE LOCK.

The FASTENER,FLARE LOCK is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, head_style: KNURLED, head_height: 0.175 INCHES MAXIMUM IN, head_diameter: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, surface_treatment: UNABLE TO DECODE, internal_drive_style: SLOT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-101-6507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CA1376-6-2-10
NSN: 5340-01-101-6507
FSC: 5340 — Hardware, Commercial
CAGE: 29372 — HOWMET GLOBAL FASTENING SYSTEMS INC. DIV TRIDAIR PRODUCTS (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
head_styleKNURLED
head_height0.175 INCHES MAXIMUM IN
head_diameter0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
surface_treatmentUNABLE TO DECODE
internal_drive_styleSLOT
NSN5340-01-101-6507
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CA1376-6-2-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.175 INCHES MAXIMUM IN
•
HEAD STYLE: KNURLED
•
SURFACE TREATMENT: UNABLE TO DECODE
•
INTERNAL DRIVE STYLE: SLOT
•
MATERIAL: UNABLE TO DECODE
•
HEAD DIAMETER: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.175 INCHES MAXIMUM IN
HEAD STYLEKNURLED
SURFACE TREATMENTUNABLE TO DECODE
INTERNAL DRIVE STYLESLOT
MATERIALUNABLE TO DECODE
HEAD DIAMETER0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
CA13170-06-2-10FSKSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy CA1376-6-2-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CA1376-6-2-10?
CA1376-6-2-10 is a FASTENER,FLARE LOCK.
What parts can replace CA1376-6-2-10?
There is 1 known substitute for CA1376-6-2-10: CA13170-06-2-10FSK. Substitute compatibility should be verified for your specific system.
What is the NSN for CA1376-6-2-10?
CA1376-6-2-10 is cataloged in the U.S. Government catalog under NSN 5340-01-101-6507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CA1376-6-2-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.