PartsTable
Technical Data Sheet
Download PDF

CA13170-06-2-10FSK — FASTENER,FLARE LOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CA13170-06-2-10FSK: FASTENER,FLARE LOCK.

The FASTENER,FLARE LOCK is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, head_style: KNURLED, head_height: 0.175 INCHES MAXIMUM IN, head_diameter: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, surface_treatment: UNABLE TO DECODE, internal_drive_style: SLOT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-101-6507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CA13170-06-2-10FSK
NSN: 5340-01-101-6507
FSC: 5340 — Hardware, Commercial
CAGE: 29372 — HOWMET GLOBAL FASTENING SYSTEMS INC. DIV TRIDAIR PRODUCTS (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
head_styleKNURLED
head_height0.175 INCHES MAXIMUM IN
head_diameter0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
surface_treatmentUNABLE TO DECODE
internal_drive_styleSLOT
NSN5340-01-101-6507
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CA13170-06-2-10FSK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.175 INCHES MAXIMUM IN
•
HEAD STYLE: KNURLED
•
SURFACE TREATMENT: UNABLE TO DECODE
•
INTERNAL DRIVE STYLE: SLOT
•
MATERIAL: UNABLE TO DECODE
•
HEAD DIAMETER: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.175 INCHES MAXIMUM IN
HEAD STYLEKNURLED
SURFACE TREATMENTUNABLE TO DECODE
INTERNAL DRIVE STYLESLOT
MATERIALUNABLE TO DECODE
HEAD DIAMETER0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
CA1376-6-2-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy CA13170-06-2-10FSK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CA13170-06-2-10FSK?
CA13170-06-2-10FSK is a FASTENER,FLARE LOCK.
What parts can replace CA13170-06-2-10FSK?
There is 1 known substitute for CA13170-06-2-10FSK: CA1376-6-2-10. Substitute compatibility should be verified for your specific system.
What is the NSN for CA13170-06-2-10FSK?
CA13170-06-2-10FSK is cataloged in the U.S. Government catalog under NSN 5340-01-101-6507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CA13170-06-2-10FSK