PartsTable
Technical Data Sheet
Download PDF

C7041-100 — BEARING,ROLLER,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

C7041-100: BEARING,ROLLER,THRUST.

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, overall_height: 0.5050 INCHES NOMINAL IN, surface_finish: GROUND, special_features: 30 PCT FULL OF GREASE MIL-G-25013, style_designator: CYLINDRICAL INNER RING, CYLINDRICAL OUTER RING, SEPARABLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-126-4971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C7041-100
NSN: 3110-00-126-4971
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 00268 — CEF INDUSTRIES, LLC DBA CEF INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
overall_height0.5050 INCHES NOMINAL IN
surface_finishGROUND
special_features30 PCT FULL OF GREASE MIL-G-25013
style_designatorCYLINDRICAL INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
overall_outside_diameter1.1875 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
thrust_directional_capability_designationSINGLE
NSN3110-00-126-4971
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C7041-100 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CYLINDRICAL INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 1.1875 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.5050 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORCYLINDRICAL INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER1.1875 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURES30 PCT FULL OF GREASE MIL-G-25013
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
T100 3-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C7041-100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C7041-100?
C7041-100 is a BEARING,ROLLER,THRUST.
What parts can replace C7041-100?
There is 1 known substitute for C7041-100: T100 3-8. Substitute compatibility should be verified for your specific system.
What is the NSN for C7041-100?
C7041-100 is cataloged in the U.S. Government catalog under NSN 3110-00-126-4971. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C7041-100