PartsTable
Technical Data Sheet
Download PDF

T100 3-8 — BEARING,ROLLER,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

T100 3-8: BEARING,ROLLER,THRUST.

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, overall_height: 0.5050 INCHES NOMINAL IN, surface_finish: GROUND, special_features: 30 PCT FULL OF GREASE MIL-G-25013, style_designator: CYLINDRICAL INNER RING, CYLINDRICAL OUTER RING, SEPARABLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-126-4971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
T100 3-8
NSN: 3110-00-126-4971
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 4ZKN9 — AUBURN BEARING AND MANUFACTURING INC DIV AUBURN BEARING & MANUFACTURING (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
overall_height0.5050 INCHES NOMINAL IN
surface_finishGROUND
special_features30 PCT FULL OF GREASE MIL-G-25013
style_designatorCYLINDRICAL INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
overall_outside_diameter1.1875 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
thrust_directional_capability_designationSINGLE
NSN3110-00-126-4971
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: T100 3-8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CYLINDRICAL INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 1.1875 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.5050 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORCYLINDRICAL INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER1.1875 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURES30 PCT FULL OF GREASE MIL-G-25013
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy T100 3-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is T100 3-8?
T100 3-8 is a BEARING,ROLLER,THRUST.
What is the NSN for T100 3-8?
T100 3-8 is cataloged in the U.S. Government catalog under NSN 3110-00-126-4971. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — T100 3-8