PartsTable
Technical Data Sheet
Download PDF

C6067-632-1 — NUT STRIP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C6067-632-1: NUT STRIP.

The NUT STRIP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: STRIP, nut_width: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, nut_length: 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN, surface_treatment: PHOSPHATE OR ZINC OR CHROMATE OVERALL, material_thickness: 0.012 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-141-1846, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C6067-632-1
NSN: 5310-00-141-1846
FSC: 5310 — Nuts and Washers
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSTRIP
nut_width0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
nut_length1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
surface_treatmentPHOSPHATE OR ZINC OR CHROMATE OVERALL
material_thickness0.012 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
aperture_center_to_center_distance0.750 INCHES NOMINAL IN
mating_member_diameter_accommodated0.138 INCHES NOMINAL IN
NSN5310-00-141-1846
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C6067-632-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
NUT LENGTH: 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
•
APERTURE CENTER TO CENTER DISTANCE: 0.750 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.012 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.138 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE OR ZINC OR CHROMATE OVERALL
•
NUT STYLE: STRIP
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
NUT WIDTH0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
NUT LENGTH1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
APERTURE CENTER TO CENTER DISTANCE0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.012 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
MATING MEMBER DIAMETER ACCOMMODATED0.138 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE OR ZINC OR CHROMATE OVERALL
NUT STYLESTRIP
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
10538Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy C6067-632-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C6067-632-1?
C6067-632-1 is a NUT STRIP.
What parts can replace C6067-632-1?
There is 1 known substitute for C6067-632-1: 10538. Substitute compatibility should be verified for your specific system.
What is the NSN for C6067-632-1?
C6067-632-1 is cataloged in the U.S. Government catalog under NSN 5310-00-141-1846. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C6067-632-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.