PartsTable
Technical Data Sheet
PartsTable / MRO / 10538
10538 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include width: 0.433 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN, length: 1.495 INCHES NOMINAL IN, radius: 0.625 INCHES NOMINAL IN, material: ALUMINUM OVERALL, nut_style: STRIP, nut_width: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-141-1846, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10538
NSN: 5310-00-141-1846
FSC: 5310
CAGE: 82423 — KLEINSCHMIDT INC (USA)
SPECIFICATIONS
width0.433 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
length1.495 INCHES NOMINAL IN
radius0.625 INCHES NOMINAL IN
materialALUMINUM OVERALL
nut_styleSTRIP
nut_width0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
thickness0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
body_styleRECTANGULAR COMMUTATOR
nut_length1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
overall_width1.115 INCHES NOMINAL IN
aperture_width0.859 INCHES NOMINAL IN
NSN5310-00-141-1846
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10538 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: PHOSPHATE OR ZINC OR CHROMATE OVERALL
•
NUT WIDTH: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.138 INCHES NOMINAL IN
•
NUT STYLE: STRIP
•
MATERIAL THICKNESS: 0.012 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
NUT LENGTH: 1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
•
APERTURE CENTER TO CENTER DISTANCE: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SURFACE TREATMENTPHOSPHATE OR ZINC OR CHROMATE OVERALL
NUT WIDTH0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
MATING MEMBER DIAMETER ACCOMMODATED0.138 INCHES NOMINAL IN
NUT STYLESTRIP
MATERIAL THICKNESS0.012 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
NUT LENGTH1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
APERTURE CENTER TO CENTER DISTANCE0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
C6067-632-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10538?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10538?
10538 is a HOSE ASSEMBLY,NONMETALLIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10538?
There is 1 known substitute for 10538: C6067-632-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 10538?
10538 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-141-1846. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10538

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026