PartsTable
Technical Data Sheet
PartsTable / MRO / C4369
C4369 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR NETWORK,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.281 INCHES MINIMUM AND 0.289 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.460 INCHES MINIMUM AND 4.560 INCHES MAXIMUM IN, aperture_diameter: 2.380 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL, gage_ring_thickness: 0.080 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-138-0010, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ C4369
NSN: 5330-00-138-0010
FSC: 5330
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 AND RUBBER SYNTHETIC OVERALL
hole_diameter0.281 INCHES MINIMUM AND 0.289 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.460 INCHES MINIMUM AND 4.560 INCHES MAXIMUM IN
aperture_diameter2.380 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
gage_ring_thickness0.080 INCHES NOMINAL IN
bolt_circle_diameter4.040 INCHES MINIMUM AND 4.140 INCHES MAXIMUM IN
outside_corner_radius0.420 INCHES NOMINAL IN
cross-sectional_thickness0.120 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5330-00-138-0010
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C4369 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
GAGE RING THICKNESS: 0.080 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.281 INCHES MINIMUM AND 0.289 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: ALUMINUM ALLOY 6061 AND RUBBER SYNTHETIC OVERALL
•
OUTSIDE CORNER RADIUS: 0.420 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
GAGE RING THICKNESS0.080 INCHES NOMINAL IN
HOLE DIAMETER0.281 INCHES MINIMUM AND 0.289 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALALUMINUM ALLOY 6061 AND RUBBER SYNTHETIC OVERALL
OUTSIDE CORNER RADIUS0.420 INCHES NOMINAL IN
APERTURE DIAMETER2.380 INCHES NOMINAL IN
OVERALL WIDTH4.460 INCHES MINIMUM AND 4.560 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.120 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER4.040 INCHES MINIMUM AND 4.140 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
10365-62Interchangeable
interchangeable cross-reference
interchangeable
40357Interchangeable
interchangeable cross-reference
interchangeable
37013-250Interchangeable
interchangeable cross-reference
interchangeable
3748FXInterchangeable
interchangeable cross-reference
interchangeable
4-4-4 130438BInterchangeable
interchangeable cross-reference
interchangeable
58116-004Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C4369?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C4369?
C4369 is a RESISTOR NETWORK,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace C4369?
There are 10 known substitutes for C4369: 10365-62, 40357, 37013-250 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C4369?
C4369 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-138-0010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C4369

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026