PartsTable
Technical Data Sheet
10365-62 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.188 INCHES NOMINAL IN, material: STEEL, outside_diameter: 0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN, special_features: REFERENCE MANUAL NO. 37013-250, style_designator: CUP, surface_treatment: CADMIUM.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-354-1147, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10365-62
NSN: 5340-00-354-1147
FSC: 5340
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
height0.188 INCHES NOMINAL IN
materialSTEEL
outside_diameter0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
special_featuresREFERENCE MANUAL NO. 37013-250
style_designatorCUP
surface_treatmentCADMIUM
material_thickness0.037 INCHES NOMINAL IN
material_document_and_classificationAISI C1010 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-354-1147
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10365-62 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL DOCUMENT AND CLASSIFICATION: AISI C1010 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL: STEEL
HEIGHT: 0.188 INCHES NOMINAL IN
OUTSIDE DIAMETER: 0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
STYLE DESIGNATOR: CUP
SURFACE TREATMENT: CADMIUM
MATERIAL THICKNESS: 0.037 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAISI C1010 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL
HEIGHT0.188 INCHES NOMINAL IN
OUTSIDE DIAMETER0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
STYLE DESIGNATORCUP
SPECIAL FEATURESREFERENCE MANUAL NO. 37013-250
SURFACE TREATMENTCADMIUM
MATERIAL THICKNESS0.037 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
933617-109Upgraded Successor
successor cross-reference
successor
ES7073-109Upgraded Successor
successor cross-reference
successor
A45020-109Upgraded Successor
successor cross-reference
successor
CA5347Interchangeable
interchangeable cross-reference
interchangeable
C4369Interchangeable
interchangeable cross-reference
interchangeable
40357Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10365-62?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10365-62?
10365-62 is a PLUG,EXPANSION.
What parts can replace 10365-62?
There are 16 known substitutes for 10365-62: 933617-109, ES7073-109, A45020-109 and 13 more. Substitute compatibility should be verified for your specific system.
Is 10365-62 still available?
10365-62 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10365-62