PartsTable
Technical Data Sheet
Download PDF

BP9714-2G — CATCH,FRICTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BP9714-2G: CATCH,FRICTION.

The CATCH,FRICTION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, length: 1.438 INCHES NOMINAL IN, material: STEEL OVERALL, features_provided: SCREW, surface_treatment: ZINC OVERALL, nondefinitive_spec/std_data: F1073D TYPE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-913-5301, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BP9714-2G
NSN: 5340-00-913-5301
FSC: 5340 — Hardware, Commercial
CAGE: 01930 — AMEROCK CORP P O BOX 900 FREEPORT IL 61032-0900 (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
length1.438 INCHES NOMINAL IN
materialSTEEL OVERALL
features_providedSCREW
surface_treatmentZINC OVERALL
nondefinitive_spec/std_dataF1073D TYPE
NSN5340-00-913-5301
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BP9714-2G MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.438 INCHES NOMINAL IN
•
FEATURES PROVIDED: SCREW
•
NONDEFINITIVE SPEC/STD DATA: F1073D TYPE
•
SURFACE TREATMENT: ZINC OVERALL
•
WIDTH: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
LENGTH1.438 INCHES NOMINAL IN
FEATURES PROVIDEDSCREW
NONDEFINITIVE SPEC/STD DATAF1073D TYPE
SURFACE TREATMENTZINC OVERALL
WIDTH0.750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
FFH111Reference document
Same NSN cross-reference
Reference document — Secondary reference
B0307Reference document
Same NSN cross-reference
Reference document — Secondary reference
A156.9 B03072Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
B3BP9714-2GReference document
Same NSN cross-reference
Reference document — Secondary reference
35Reference document
Pago tarjeta de credito
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BP9714-2G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BP9714-2G?
BP9714-2G is a CATCH,FRICTION.
What parts can replace BP9714-2G?
There are 5 known substitutes for BP9714-2G: FFH111, B0307, A156.9 B03072 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BP9714-2G?
BP9714-2G is cataloged in the U.S. Government catalog under NSN 5340-00-913-5301. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BP9714-2G

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.