PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFH111
FFH111 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOLT,FOOT is a the manufacturer industrial component. Key specifications include color: BRASS, width: 1.000 INCHES NOMINAL IN, length: 2.000 INCHES NOMINAL IN, diameter: 0.344 INCHES NOMINAL BAR IN, material: ALUMINUM OVERALL, bolt_type: REGULAR BEVEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-004-7118, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFH111
NSN: 5340-00-004-7118
FSC: 5340
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
colorBRASS
width1.000 INCHES NOMINAL IN
length2.000 INCHES NOMINAL IN
diameter0.344 INCHES NOMINAL BAR IN
materialALUMINUM OVERALL
bolt_typeREGULAR BEVEL
end_styleSHORT TWISTED HOOK BOTH ENDS
hook_typeDOUBLE PRONG
unit_typeBASEBOARD MOUNTED
leaf_width1.750 INCHES NOMINAL IN
action_typeSPRING
design_typeCLOSED
NSN5340-00-004-7118
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FFH111 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 1090S TYPE
•
SURFACE TREATMENT: ANODIZE KNOB
•
MATERIAL: ALUMINUM OR COPPER ALLOY KNOB
•
KNOB QUANTITY: 1
•
BOLT TYPE: REVERSIBLE BEVEL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESOPERATION METHOD:KNOB ON OUTSIDE AND LEVER ON INSIDE;KEYWAY:NOT INCLUDED;DOOR MINIMUM THICKNESS FOR WHICH DESIGNED:0.750 IN.;KNOB DESIGN:PLAIN;RELEASE BAR:NOT INCLUDED; IN
NONDEFINITIVE SPEC/STD DATA1090S TYPE
SURFACE TREATMENTANODIZE KNOB
MATERIALALUMINUM OR COPPER ALLOY KNOB
KNOB QUANTITY1
SURFACE TREATMENTANODIZE CASE
BOLT TYPEREVERSIBLE BEVEL
MATERIALALUMINUM OR COPPER ALLOY CASE
ACTION TYPESPRING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
N117-986Upgraded Successor
successor cross-reference
successor
FF-H-111Upgraded Successor
successor cross-reference
successor
A-A-462Upgraded Successor
successor cross-reference
successor
320432Upgraded Successor
successor cross-reference
successor
320441Upgraded Successor
successor cross-reference
successor
BHMA-A156.20 A83162 3-1/4INUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFH111?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFH111?
FFH111 is a BOLT,FOOT.
What parts can replace FFH111?
There are 18 known substitutes for FFH111: N117-986, FF-H-111, A-A-462 and 15 more. Substitute compatibility should be verified for your specific system.
Is FFH111 still available?
FFH111 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFH111

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026