PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BECX3N1
BECX3N1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.573 INCHES MINIMUM AND 0.595 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.989 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OR ZINC OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-1139, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BECX3N1
NSN: 5310-00-013-1139
FSC: 5310
CAGE: 00000
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.573 INCHES MINIMUM AND 0.595 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.989 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OR ZINC OVERALL
material_thickness0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
nondefinitive_spec/std_data3 STYLE AND A CLASS
material_document_and_classificationFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5310-00-013-1139
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BECX3N1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 3 STYLE AND A CLASS
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.573 INCHES MINIMUM AND 0.595 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA3 STYLE AND A CLASS
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
MATERIAL THICKNESS0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
HOLE DIAMETER0.573 INCHES MINIMUM AND 0.595 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER0.989 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
FFW84CLASSASTYLE3Interchangeable
interchangeable cross-reference
interchangeable
DX253Interchangeable
interchangeable cross-reference
interchangeable
34846S2Interchangeable
interchangeable cross-reference
interchangeable
LWZ305Interchangeable
interchangeable cross-reference
interchangeable
MW6-10Interchangeable
interchangeable cross-reference
interchangeable
120638Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy BECX3N1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BECX3N1?
BECX3N1 is a WASHER,LOCK.
What parts can replace BECX3N1?
There are 25 known substitutes for BECX3N1: FFW84CLASSASTYLE3, DX253, 34846S2 and 22 more. Substitute compatibility should be verified for your specific system.
Is BECX3N1 still available?
BECX3N1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BECX3N1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026