PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 34846S2
34846S2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.319 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.601 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 0.097 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-010-8579, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
34846S2
NSN: 5310-00-010-8579
FSC: 5310
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.319 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.601 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness0.097 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
nondefinitive_spec/std_data3 STYLE AND A CLASS
material_document_and_classificationFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-010-8579
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 34846S2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 3 STYLE AND A CLASS
•
OUTSIDE DIAMETER: 0.601 INCHES MAXIMUM IN
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
MATERIAL THICKNESS: 0.097 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.319 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD SINGLE MATERIAL RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA3 STYLE AND A CLASS
OUTSIDE DIAMETER0.601 INCHES MAXIMUM IN
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
MATERIAL THICKNESS0.097 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
HOLE DIAMETER0.319 INCHES MINIMUM AND 0.333 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
LWZ305Interchangeable
interchangeable cross-reference
interchangeable
MW6-10Interchangeable
interchangeable cross-reference
interchangeable
120638Interchangeable
interchangeable cross-reference
interchangeable
FFW84CLASSASTYLE3Interchangeable
interchangeable cross-reference
interchangeable
H965170405Interchangeable
interchangeable cross-reference
interchangeable
0912303-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 34846S2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 34846S2?
34846S2 is a WASHER,LOCK.
What parts can replace 34846S2?
There are 28 known substitutes for 34846S2: LWZ305, MW6-10, 120638 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 34846S2?
34846S2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-010-8579. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 34846S2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026