PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BE11137
BE11137 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include overall_width: 1.000 INCHES NOMINAL IN, overall_length: 1.190 INCHES NOMINAL IN, loop_inside_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-321-8665, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BE11137
NSN: 5340-01-321-8665
FSC: 5340
CAGE: 06721 — HALDEX BRAKE PRODUCTS CORPORATION (USA)
SPECIFICATIONS
overall_width1.000 INCHES NOMINAL IN
overall_length1.190 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
NSN5340-01-321-8665
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BE11137 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH1.190 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
V3D10075PC28Interchangeable
interchangeable cross-reference
interchangeable
ARP568-137MILP5 516-70DUR0Interchangeable
interchangeable cross-reference
interchangeable
332C8196-3Interchangeable
interchangeable cross-reference
interchangeable
C3663-1Interchangeable
interchangeable cross-reference
interchangeable
11137Interchangeable
interchangeable cross-reference
interchangeable
462-279Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BE11137?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BE11137?
BE11137 is a CLAMP,LOOP.
What parts can replace BE11137?
There are 18 known substitutes for BE11137: V3D10075PC28, ARP568-137MILP5 516-70DUR0, 332C8196-3 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BE11137?
BE11137 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-321-8665. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BE11137

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026