PartsTable
Technical Data Sheet
PartsTable / O-RING / 332C8196-3
332C8196-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 2.256 INCHES NOMINAL IN, center_hole_diameter: 2.033 INCHES MINIMUM AND 2.067 INCHES MAXIMUM IN, cross-sectional_height: 0.094 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-224-4699, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
332C8196-3
NSN: 5331-00-224-4699
FSC: 5331 — O-RING
CAGE: 1VPW8 — GENERAL DYNAMICS MISSION SYSTEMS, INC. DBA GDMS (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter2.256 INCHES NOMINAL IN
center_hole_diameter2.033 INCHES MINIMUM AND 2.067 INCHES MAXIMUM IN
cross-sectional_height0.094 INCHES NOMINAL IN
NSN5331-00-224-4699
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 332C8196-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.033 INCHES MINIMUM AND 2.067 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.256 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.094 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.033 INCHES MINIMUM AND 2.067 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.256 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
P48026-137Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS28775Interchangeable
interchangeable cross-reference
interchangeable
MS28775-137Interchangeable
interchangeable cross-reference
interchangeable
195076Interchangeable
interchangeable cross-reference
interchangeable
287MR003P038Interchangeable
interchangeable cross-reference
interchangeable
C3663-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 332C8196-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 332C8196-3?
332C8196-3 is a O-RING.
What parts can replace 332C8196-3?
There are 28 known substitutes for 332C8196-3: P48026-137, SAE-AS28775, MS28775-137 and 25 more. Substitute compatibility should be verified for your specific system.
Is 332C8196-3 still available?
332C8196-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 332C8196-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026