B1QH4235A — SHAFT,AXLE,AUTOMOTIVE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

B1QH4235A: SHAFT,AXLE,AUTOMOTIVE.

The SHAFT,AXLE,AUTOMOTIVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4150H, first_end_type: FLANGED, overall_length: 40.969 INCHES MINIMUM AND 41.031 INCHES MAXIMUM IN, second_end_type: SPLINED, flange_hole_taper: 8.500 INCHES NOMINAL PER FOOT IN, taper_major_diameter: 0.783 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 2520-00-062-3955, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

B1QH4235A

NSN: 2520-00-062-3955
FSC: 2520 — Vehicular Power Transmission Components
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)

SPECIFICATIONS

material	STEEL COMP 4150H
first_end_type	FLANGED
overall_length	40.969 INCHES MINIMUM AND 41.031 INCHES MAXIMUM IN
second_end_type	SPLINED
flange_hole_taper	8.500 INCHES NOMINAL PER FOOT IN
taper_major_diameter	0.783 INCHES NOMINAL IN
first_end_bearing_seat	NOT INCLUDED
second_end_spline_type	STRAIGHT
flange_outside_diameter	6.123 INCHES MINIMUM AND 6.127 INCHES MAXIMUM IN
second_end_bearing_seat	NOT INCLUDED
flange_overall_thickness	0.531 INCHES NOMINAL IN
second_end_spline_length	3.313 INCHES NOMINAL IN
NSN	2520-00-062-3955

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY TYPE AND QUANTITY: 12 TAPERED HOLE

•

SECOND END TYPE: SPLINED

•

FIRST END TYPE: FLANGED

•

FLANGE HOLE TAPER: 8.500 INCHES NOMINAL PER FOOT IN

•

SECOND END SPLINE QUANTITY: 16

•

SECOND END SPLINE MINOR DIAMETER: 1.830 INCHES MINIMUM AND 1.840 INCHES MAXIMUM IN

•

SECOND END BEARING SEAT: NOT INCLUDED

•

FLANGE THICKNESS AT MOUNTING HOLE: 0.438 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

MOUNTING FACILITY TYPE AND QUANTITY	12 TAPERED HOLE
SECOND END TYPE	SPLINED
FIRST END TYPE	FLANGED
FLANGE HOLE TAPER	8.500 INCHES NOMINAL PER FOOT IN
SECOND END SPLINE QUANTITY	16
SECOND END SPLINE MINOR DIAMETER	1.830 INCHES MINIMUM AND 1.840 INCHES MAXIMUM IN
SECOND END BEARING SEAT	NOT INCLUDED
FLANGE THICKNESS AT MOUNTING HOLE	0.438 INCHES NOMINAL IN
SECOND END SPLINE MAJOR DIAMETER	1.975 INCHES MINIMUM AND 1.980 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AISI 4150H ASSN STD SINGLE MATERIAL RESPONSE

SUBSTITUTES & CROSS-REFERENCES 4

032686Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

846775Reference document

Same NSN cross-reference

Reference document — Secondary reference

1925819Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

32686Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy B1QH4235A?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is B1QH4235A?

B1QH4235A is a SHAFT,AXLE,AUTOMOTIVE.

What parts can replace B1QH4235A?

There are 4 known substitutes for B1QH4235A: 032686, 846775, 1925819 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for B1QH4235A?

B1QH4235A is cataloged in the U.S. Government catalog under NSN 2520-00-062-3955. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

B1QH4235A — SHAFT,AXLE,AUTOMOTIVE

Request a Quote — B1QH4235A