032686 — SHAFT,AXLE,AUTOMOTIVE

✓ Government record, cited

Legrand · COMPONENT

PRODUCT OVERVIEW

032686: SHAFT,AXLE,AUTOMOTIVE.

OS1/OS2 single-mode fibre optic cords (9/125 μm) Max. optical losses/Master: 0.25 dB For 9/125 μm single-mode installations, OS 1/OS 2 type Yellow sheaths LC/LC Uniboot duplex cords Reversible polarity Length: 1 m Legrand cabling system, fibre optic LCS³ - patch cords and feedthrough sockets Fitted at each end with 2 connectors with ceramic ferrule. Individually packed and tested (report supplied) LSZH Zipcord sheath Other configurations on request This part is cataloged in the U.S.

Government catalog under NSN 2520-00-062-3955, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS

032686

NSN: 2520-00-062-3955
FSC: 2520 — Vehicular Power Transmission Components
CAGE: 81118 — EATON CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP 4150H
first_end_type	FLANGED
overall_length	40.969 INCHES MINIMUM AND 41.031 INCHES MAXIMUM IN
second_end_type	SPLINED
flange_hole_taper	8.500 INCHES NOMINAL PER FOOT IN
taper_major_diameter	0.783 INCHES NOMINAL IN
first_end_bearing_seat	NOT INCLUDED
second_end_spline_type	STRAIGHT
flange_outside_diameter	6.123 INCHES MINIMUM AND 6.127 INCHES MAXIMUM IN
second_end_bearing_seat	NOT INCLUDED
flange_overall_thickness	0.531 INCHES NOMINAL IN
second_end_spline_length	3.313 INCHES NOMINAL IN
NSN	2520-00-062-3955

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY TYPE AND QUANTITY: 12 TAPERED HOLE

•

SECOND END TYPE: SPLINED

•

FIRST END TYPE: FLANGED

•

FLANGE HOLE TAPER: 8.500 INCHES NOMINAL PER FOOT IN

•

SECOND END SPLINE QUANTITY: 16

•

SECOND END SPLINE MINOR DIAMETER: 1.830 INCHES MINIMUM AND 1.840 INCHES MAXIMUM IN

•

SECOND END BEARING SEAT: NOT INCLUDED

•

FLANGE THICKNESS AT MOUNTING HOLE: 0.438 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

MOUNTING FACILITY TYPE AND QUANTITY	12 TAPERED HOLE
SECOND END TYPE	SPLINED
FIRST END TYPE	FLANGED
FLANGE HOLE TAPER	8.500 INCHES NOMINAL PER FOOT IN
SECOND END SPLINE QUANTITY	16
SECOND END SPLINE MINOR DIAMETER	1.830 INCHES MINIMUM AND 1.840 INCHES MAXIMUM IN
SECOND END BEARING SEAT	NOT INCLUDED
FLANGE THICKNESS AT MOUNTING HOLE	0.438 INCHES NOMINAL IN
SECOND END SPLINE MAJOR DIAMETER	1.975 INCHES MINIMUM AND 1.980 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AISI 4150H ASSN STD SINGLE MATERIAL RESPONSE

SUBSTITUTES & CROSS-REFERENCES 4

846775Reference document

Same NSN cross-reference

Reference document — Secondary reference

B1QH4235AReference document

Same NSN cross-reference

Reference document — Secondary reference

1925819Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

32686Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 032686?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 032686?

032686 is a SHAFT,AXLE,AUTOMOTIVE manufactured by Legrand.

What parts can replace 032686?

There are 4 known substitutes for 032686: 846775, B1QH4235A, 1925819 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 032686?

032686 is cataloged in the U.S. Government catalog under NSN 2520-00-062-3955. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

032686 — SHAFT,AXLE,AUTOMOTIVE

Request a Quote — 032686