PartsTable
Technical Data Sheet
Download PDF

B13850 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B13850: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include height: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN, length: 0.562 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024, hole_diameter: 0.104 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, furnished_items: LOCKNUT, material_document_and_classification: QQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-610-5787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B13850
NSN: 5340-00-610-5787
FSC: 5340 — Hardware, Commercial
CAGE: 89305 — SIMMONDS PRECISION PRODUCTS INC (USA)
SPECIFICATIONS
height0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
length0.562 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024
hole_diameter0.104 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
material_document_and_classificationQQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-610-5787
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B13850 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.562 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 2024
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.104 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.562 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE
HEIGHT0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2024
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.104 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
B13850-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
04052573047360Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B13850?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B13850?
B13850 is a CLAMP,SYNCHRO.
What parts can replace B13850?
There are 2 known substitutes for B13850: B13850-1, 04052573047360. Substitute compatibility should be verified for your specific system.
What is the NSN for B13850?
B13850 is cataloged in the U.S. Government catalog under NSN 5340-00-610-5787. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B13850