PartsTable
Technical Data Sheet
Download PDF

04052573047360 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

04052573047360: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include height: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN, length: 0.562 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024, hole_diameter: 0.104 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, furnished_items: LOCKNUT, material_document_and_classification: QQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-610-5787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
04052573047360
NSN: 5340-00-610-5787
FSC: 5340 — Hardware, Commercial
CAGE: D1131 — AUTOFLUG GMBH (DEU)
SPECIFICATIONS
height0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
length0.562 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024
hole_diameter0.104 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
material_document_and_classificationQQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-610-5787
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 04052573047360 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.562 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 2024
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.104 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.562 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE
HEIGHT0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2024
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.104 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
B13850Reference document
Same NSN cross-reference
Reference document — Secondary reference
B13850-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 04052573047360?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 04052573047360?
04052573047360 is a CLAMP,SYNCHRO.
What parts can replace 04052573047360?
There are 2 known substitutes for 04052573047360: B13850, B13850-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 04052573047360?
04052573047360 is cataloged in the U.S. Government catalog under NSN 5340-00-610-5787. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 04052573047360