PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AT5CANG25
AT5CANG25 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.3125 INCHES NOMINAL IN, alignment_type: RIGID, inner_ring_width: 0.4375 INCHES NOMINAL IN, outer_ring_width: 0.3437 INCHES NOMINAL IN, style_designator: AIRFRAME, HARDENED AND GROUND, NON-SEPARABLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1244, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AT5CANG25
NSN: 3110-00-198-1244
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3125 INCHES NOMINAL IN
alignment_typeRIGID
inner_ring_width0.4375 INCHES NOMINAL IN
outer_ring_width0.3437 INCHES NOMINAL IN
style_designatorAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCHROMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter0.8125 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-198-1244
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AT5CANG25 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTER RING WIDTH: 0.3437 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
ALIGNMENT TYPE: RIGID
•
INNER RING WIDTH: 0.4375 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: AIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
OUTER RING WIDTH0.3437 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
ALIGNMENT TYPERIGID
INNER RING WIDTH0.4375 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
MATERIALSTEEL OVERALL
STYLE DESIGNATORAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER0.8125 INCHES NOMINAL IN
SURFACE TREATMENTCHROMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
17224Interchangeable
interchangeable cross-reference
interchangeable
AT5ANG25Interchangeable
interchangeable cross-reference
interchangeable
111650Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AT5CANG25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AT5CANG25?
AT5CANG25 is a BEARING,ROLLER,NEEDLE.
What parts can replace AT5CANG25?
There are 3 known substitutes for AT5CANG25: 17224, AT5ANG25, 111650. Substitute compatibility should be verified for your specific system.
What is the NSN for AT5CANG25?
AT5CANG25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1244. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AT5CANG25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026