PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 111650
111650 ✓ Verified by PartsTable
Peach · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Toner modules from Peach ensure superb printouts with quality that remains consistent over the long run. The units are remanufactured, in a process that includes 100% replacement of all components subject to wear. Quality you can feel! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7466, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111650
NSN: 3110-00-108-7466
FSC: 3110
CAGE: 74480 — VIBRATECH INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3125 INCHES NOMINAL IN
alignment_typeRIGID
inner_ring_width0.4375 INCHES NOMINAL IN
outer_ring_width0.3437 INCHES NOMINAL IN
style_designatorAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter0.8125 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
NSN3110-00-108-7466
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 111650 · Peach ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
•
LUBRICATION MATERIAL: GREASE
•
INNER RING WIDTH: 0.4375 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
OUTER RING WIDTH: 0.3437 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: AIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
LUBRICATION MATERIALGREASE
INNER RING WIDTH0.4375 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
OUTER RING WIDTH0.3437 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.8125 INCHES NOMINAL IN
STYLE DESIGNATORAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
BORE DIAMETER0.3125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
172-24Interchangeable
interchangeable cross-reference
interchangeable
5NBC713Interchangeable
interchangeable cross-reference
interchangeable
AT5CANG25Interchangeable
interchangeable cross-reference
interchangeable
5NBC713JMILG3278AInterchangeable
interchangeable cross-reference
interchangeable
69-539-2Interchangeable
interchangeable cross-reference
interchangeable
69-539Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 111650?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111650?
111650 is a BEARING,ROLLER,NEEDLE manufactured by Peach.
What parts can replace 111650?
There are 13 known substitutes for 111650: 172-24, 5NBC713, AT5CANG25 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 111650?
111650 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7466. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111650

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026