AT2000 — PROCESSING MACHINE,PHOTOGRAPHIC

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

AT2000: PROCESSING MACHINE,PHOTOGRAPHIC.

PROCESSING MACHINE,PHOTOGRAPHIC. Key specifications include depth: 12.25 INCHES NOMINAL IN, width: 4.78 INCHES NOMINAL IN, height: 4.85 INCHES NOMINAL IN, fuel_type: DIESEL FUEL OIL, current_type: DC, voltage_in_volts: 12.0 AND 24.0. This part is cataloged in the U.S.

Government catalog under NSN 6525-01-512-1960, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AT2000

NSN: 6525-01-512-1960
NIINs: 015121960, 016675055
FSC: 6525 — Imaging Equipment and Supplies: Medical, Dental, Veterinary
CAGE: 53542 — AIR TECHNIQUES, INC. (USA)

SPECIFICATIONS

depth	12.25 INCHES NOMINAL IN
width	4.78 INCHES NOMINAL IN
height	4.85 INCHES NOMINAL IN
fuel_type	DIESEL FUEL OIL
current_type	DC
voltage_in_volts	12.0 AND 24.0
circulated_air_type	HEATED
heating_element_type	BURNER
maximum_air_flow_rate	37.0 CUBIC FEET PER MINUTE
operating_control_type	HAND SWITCH
fuel_consumption_rate_per_hour	0.06 GALLONS PER HOUR
part_name_assigned_by_controlling_agency	WEBASTO DEISEL AIR TOP KIT HEATER
NSN	6525-01-512-1960

COMPONENT DIAGRAM

KEY FEATURES

•

PHASE: SINGLE

•

TEMP CONTROLLED FEATURE: INCLUDED

•

CURRENT TYPE: AC

•

USAGE DESIGN: FILM

•

LOADING CHARACTERISTIC: DAYLIGHT

•

VOLTAGE IN VOLTS: 115.0

•

LOADING TYPE: MAGAZINE

TECHNICAL CHARACTERISTICS

PHASE	SINGLE
TEMP CONTROLLED FEATURE	INCLUDED
CURRENT TYPE	AC
USAGE DESIGN	FILM
LOADING CHARACTERISTIC	DAYLIGHT
VOLTAGE IN VOLTS	115.0
LOADING TYPE	MAGAZINE
SPECIAL FEATURES	8 AMPS; THREE PRONG PLUG REQUIRED; 2.5 MINUTE ENDO QUICK LOOK FILM PROCESSING; 5.5 MINUTE ARCHIVAL FILM PROCESSING; WATER FLOE .5 GPM; REQUIRES 80 PSI MAX WATER PRESSURE WITH 30PSI MIN; WATER SOURCE MUST HAVE MANUAL SHUT OFF NEAR PROCESSOR; ADAPTERS TO CONNECT .5 INCH MPT OR .75 INCH MALE GARDEN HOSE FITTING; SUPPLIED TUBING AT REAR OF PROCESSOR IS 6 FEET LONG; VACUUM BREAKER NOT REQUIRED; 1 INCH AIR GAP BETWEEN WATER SUPPLY INLET AND TOP OF TANK; WATER TEMP 55 DEG F TO 80 DEG F; MIXING VALVE NOT REQUIRED IF WATER TEMP IS IN RANGE; 1.5 INCH PVC STANDPIPE CONNECTED TO A 1.5 INCH PVC TRAP; DO NOT DRAIN INTO COPPER OR BRASS IN
FREQUENCY RATING	60.0 HERTZ NOMINAL
SPECIFIC USE	FILM PROCESSING MACHINE

SUBSTITUTES & CROSS-REFERENCES 1

LL-H36-8308Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy AT2000?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AT2000?

AT2000 is a PROCESSING MACHINE,PHOTOGRAPHIC.

What parts can replace AT2000?

There is 1 known substitute for AT2000: LL-H36-8308. Substitute compatibility should be verified for your specific system.

What is the NSN for AT2000?

AT2000 is cataloged in the U.S. Government catalog under NSN 6525-01-512-1960. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AT2000 — PROCESSING MACHINE,PHOTOGRAPHIC

Request a Quote — AT2000