LL-H36-8308: PROCESSING MACHINE,PHOTOGRAPHIC.
PROCESSING MACHINE,PHOTOGRAPHIC. Key specifications include phase: SINGLE, current_type: AC, loading_type: MAGAZINE, specific_use: FILM PROCESSING MACHINE, usage_design: FILM, frequency_rating: 60.0 HERTZ NOMINAL. This part is cataloged in the U.S.
Government catalog under NSN 6525-01-512-1960, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| phase | SINGLE |
| current_type | AC |
| loading_type | MAGAZINE |
| specific_use | FILM PROCESSING MACHINE |
| usage_design | FILM |
| frequency_rating | 60.0 HERTZ NOMINAL |
| voltage_in_volts | 115.0 |
| installation_design | PORTABLE |
| loading_characteristic | DAYLIGHT |
| temp_controlled_feature | INCLUDED |
| part_name_assigned_by_controlling_agency | MODEL A/T 2000 X-RAY FILM PROCESSOR |
| NSN | 6525-01-512-1960 |
| PHASE | SINGLE |
| TEMP CONTROLLED FEATURE | INCLUDED |
| CURRENT TYPE | AC |
| USAGE DESIGN | FILM |
| LOADING CHARACTERISTIC | DAYLIGHT |
| VOLTAGE IN VOLTS | 115.0 |
| LOADING TYPE | MAGAZINE |
| SPECIAL FEATURES | 8 AMPS; THREE PRONG PLUG REQUIRED; 2.5 MINUTE ENDO QUICK LOOK FILM PROCESSING; 5.5 MINUTE ARCHIVAL FILM PROCESSING; WATER FLOE .5 GPM; REQUIRES 80 PSI MAX WATER PRESSURE WITH 30PSI MIN; WATER SOURCE MUST HAVE MANUAL SHUT OFF NEAR PROCESSOR; ADAPTERS TO CONNECT .5 INCH MPT OR .75 INCH MALE GARDEN HOSE FITTING; SUPPLIED TUBING AT REAR OF PROCESSOR IS 6 FEET LONG; VACUUM BREAKER NOT REQUIRED; 1 INCH AIR GAP BETWEEN WATER SUPPLY INLET AND TOP OF TANK; WATER TEMP 55 DEG F TO 80 DEG F; MIXING VALVE NOT REQUIRED IF WATER TEMP IS IN RANGE; 1.5 INCH PVC STANDPIPE CONNECTED TO A 1.5 INCH PVC TRAP; DO NOT DRAIN INTO COPPER OR BRASS IN |
| FREQUENCY RATING | 60.0 HERTZ NOMINAL |
| SPECIFIC USE | FILM PROCESSING MACHINE |
No substitute or cross-reference records for this part.