PartsTable
Technical Data Sheet
PartsTable / O-RING / ASTM 2000 GR 2AA910A133EA14F17
ASTM 2000 GR 2AA910A133EA14F17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, center_hole_diameter: 0.755 INCHES NOMINAL IN, cross-sectional_height: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-198-5490, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASTM 2000 GR 2AA910A133EA14F17
NSN: 5331-01-198-5490
FSC: 5331 — O-RING
CAGE: 81346 — AMERICAN SOCIETY FOR TESTING AND MATERIALS DBA ASTM INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
center_hole_diameter0.755 INCHES NOMINAL IN
cross-sectional_height0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
NSN5331-01-198-5490
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ASTM 2000 GR 2AA910A133EA14F17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.755 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
CROSS-SECTIONAL HEIGHT0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.755 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
M83248/2-910ESInterchangeable
interchangeable cross-reference
interchangeable
D50-0010 ITEM 3Interchangeable
interchangeable cross-reference
interchangeable
ARP568-910Interchangeable
interchangeable cross-reference
interchangeable
803-6915566-2.1 3Interchangeable
interchangeable cross-reference
interchangeable
9672M09P10Interchangeable
interchangeable cross-reference
interchangeable
MS28775-910Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ASTM 2000 GR 2AA910A133EA14F17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASTM 2000 GR 2AA910A133EA14F17?
ASTM 2000 GR 2AA910A133EA14F17 is a O-RING.
What parts can replace ASTM 2000 GR 2AA910A133EA14F17?
There are 11 known substitutes for ASTM 2000 GR 2AA910A133EA14F17: M83248/2-910ES, D50-0010 ITEM 3, ARP568-910 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASTM 2000 GR 2AA910A133EA14F17?
ASTM 2000 GR 2AA910A133EA14F17 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-198-5490. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASTM 2000 GR 2AA910A133EA14F17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026