PartsTable
Technical Data Sheet
PartsTable / O-RING / MS28775-910
MS28775-910 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 0.949 INCHES NOMINAL IN, center_hole_diameter: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-448-6753, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS28775-910
NSN: 5331-00-448-6753
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter0.949 INCHES NOMINAL IN
center_hole_diameter0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
NSN5331-00-448-6753
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS28775-910 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
TEMP RATING: 275.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TEMP RATING275.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
M83248/1-910Interchangeable
interchangeable cross-reference
interchangeable
137.000.825Interchangeable
interchangeable cross-reference
interchangeable
6V-4589Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS28778Interchangeable
interchangeable cross-reference
interchangeable
N94-84910Interchangeable
interchangeable cross-reference
interchangeable
0XN94-84910CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS28775-910?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28775-910?
MS28775-910 is a O-RING.
What parts can replace MS28775-910?
There are 33 known substitutes for MS28775-910: M83248/1-910, 137.000.825, 6V-4589 and 30 more. Substitute compatibility should be verified for your specific system.
Is MS28775-910 still available?
MS28775-910 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS28775-910

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026