AS9592-104 — BRACKET,ANGLE

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS9592-104: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: EXTENDED FLAT, first_leg_width: 0.500 INCHES NOMINAL IN, first_leg_length: 0.772 INCHES NOMINAL IN, special_features: PART NUMBER AS9592-104 HAS REPLACED MS9592-104. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-613-2635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS9592-104

NSN: 5340-01-613-2635
FSC: 5340 — Hardware, Commercial
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING
first_leg_angle	90.0 DEGREES NOMINAL
first_leg_style	EXTENDED FLAT
first_leg_width	0.500 INCHES NOMINAL IN
first_leg_length	0.772 INCHES NOMINAL IN
special_features	PART NUMBER AS9592-104 HAS REPLACED MS9592-104
style_designator	ANGLE
second_leg_length	1.83 INCHES NOMINAL IN
first_leg_thickness	0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
second_leg_thickness	0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_hole_diameter	0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
first_leg_hole_arrangement_style	NO HOLE
NSN	5340-01-613-2635

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN

•

FIRST LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN

•

FIRST LEG ANGLE: 90.0 DEGREES NOMINAL

•

SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL

•

SECOND LEG LENGTH: 1.83 INCHES NOMINAL IN

•

FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE

•

STYLE DESIGNATOR: ANGLE

•

FIRST LEG STYLE: EXTENDED FLAT

TECHNICAL CHARACTERISTICS

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER	0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	IDENTICAL
SECOND LEG LENGTH	1.83 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE	NO HOLE
STYLE DESIGNATOR	ANGLE
FIRST LEG STYLE	EXTENDED FLAT
SECOND LEG THICKNESS	0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 3

MS9592-104Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS9592Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AS9592Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS9592-104?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS9592-104?

AS9592-104 is a BRACKET,ANGLE.

What parts can replace AS9592-104?

There are 3 known substitutes for AS9592-104: MS9592-104, SAE-AS9592, AS9592. Substitute compatibility should be verified for your specific system.

What is the NSN for AS9592-104?

AS9592-104 is cataloged in the U.S. Government catalog under NSN 5340-01-613-2635. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS9592-104 — BRACKET,ANGLE

Request a Quote — AS9592-104