PartsTable
Technical Data Sheet
Download PDF

AS9592 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS9592: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: EXTENDED FLAT, first_leg_width: 0.500 INCHES NOMINAL IN, first_leg_length: 0.772 INCHES NOMINAL IN, special_features: PART NUMBER AS9592-104 HAS REPLACED MS9592-104. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-407-3461, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS9592
NSN: 5340-00-407-3461
NIINs: 004073461, 004102978, 010158820, 011649613, 012207982, 014644785, 015424062, 016132635
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEXTENDED FLAT
first_leg_width0.500 INCHES NOMINAL IN
first_leg_length0.772 INCHES NOMINAL IN
special_featuresPART NUMBER AS9592-104 HAS REPLACED MS9592-104
style_designatorANGLE
second_leg_length1.83 INCHES NOMINAL IN
first_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
second_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_hole_diameter0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleNO HOLE
NSN5340-00-407-3461
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS9592 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.500 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.757 INCHES MINIMUM AND 0.767 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
SECOND LEG WIDTH0.500 INCHES NOMINAL IN
SECOND LEG LENGTH0.757 INCHES MINIMUM AND 0.767 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
MS9592-101Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE-AS9592Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AS9592?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS9592?
AS9592 is a BRACKET,ANGLE.
What parts can replace AS9592?
There are 2 known substitutes for AS9592: MS9592-101, SAE-AS9592. Substitute compatibility should be verified for your specific system.
What is the NSN for AS9592?
AS9592 is cataloged in the U.S. Government catalog under NSN 5340-00-407-3461. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS9592

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.