PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-332MIL-P-25732
AS568-332MIL-P-25732 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: 275.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.742 INCHES MINIMUM AND 2.798 INCHES MAXIMUM IN, center_hole_diameter: 2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-641-1481, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-332MIL-P-25732
NSN: 5331-00-641-1481
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating275.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter2.742 INCHES MINIMUM AND 2.798 INCHES MAXIMUM IN
center_hole_diameter2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
material_document_and_classificationMIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5331-00-641-1481
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-332MIL-P-25732 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
TEMP RATING: 275.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 2.742 INCHES MINIMUM AND 2.798 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TEMP RATING275.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER2.742 INCHES MINIMUM AND 2.798 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-25732 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
2-332 N304-75Interchangeable
interchangeable cross-reference
interchangeable
XT36297PC32Interchangeable
interchangeable cross-reference
interchangeable
4810-771638REVBInterchangeable
interchangeable cross-reference
interchangeable
M8346/1-332Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS83461/1Interchangeable
interchangeable cross-reference
interchangeable
83007Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-332MIL-P-25732?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-332MIL-P-25732?
AS568-332MIL-P-25732 is a O-RING.
What parts can replace AS568-332MIL-P-25732?
There are 14 known substitutes for AS568-332MIL-P-25732: 2-332 N304-75, XT36297PC32, 4810-771638REVB and 11 more. Substitute compatibility should be verified for your specific system.
Is AS568-332MIL-P-25732 still available?
AS568-332MIL-P-25732 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-332MIL-P-25732

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026