PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2-332 N304-75
2-332 N304-75 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.770 INCHES NOMINAL IN, center_hole_diameter: 2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-194-3715, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-332 N304-75
NSN: 5330-00-194-3715
FSC: 5330
CAGE: C0308 — PARKER HANNIFIN GMBH O-RING DIVISION (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter2.770 INCHES NOMINAL IN
center_hole_diameter2.332 INCHES MINIMUM AND 2.368 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5330-00-194-3715
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-332 N304-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 2.340 INCHES MINIMUM AND 2.360 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 164 MAXIMUM
•
PERIPHERAL DIAMETER: 2.742 INCHES MINIMUM AND 2.798 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER2.340 INCHES MINIMUM AND 2.360 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
ELONGATION PERCENTAGE164 MAXIMUM
PERIPHERAL DIAMETER2.742 INCHES MINIMUM AND 2.798 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
N8195PC593Interchangeable
interchangeable cross-reference
interchangeable
182035Interchangeable
interchangeable cross-reference
interchangeable
N11687PC593Interchangeable
interchangeable cross-reference
interchangeable
78-102Interchangeable
interchangeable cross-reference
interchangeable
BB68Interchangeable
interchangeable cross-reference
interchangeable
NDC1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-332 N304-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-332 N304-75?
2-332 N304-75 is a O-RING.
What parts can replace 2-332 N304-75?
There are 29 known substitutes for 2-332 N304-75: N8195PC593, 182035, N11687PC593 and 26 more. Substitute compatibility should be verified for your specific system.
Is 2-332 N304-75 still available?
2-332 N304-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-332 N304-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026