PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-017 MIL-G-22050 GRADE 1

AS568-017 MIL-G-22050 GRADE 1 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR, outside_diameter: 0.816 INCHES NOMINAL IN, center_hole_diameter: 0.667 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN, cross-sectional_height: 0.0625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-821-8331, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-017 MIL-G-22050 GRADE 1
NSN: 5331-00-821-8331
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
outside_diameter0.816 INCHES NOMINAL IN
center_hole_diameter0.667 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
cross-sectional_height0.0625 INCHES NOMINAL IN
NSN5331-00-821-8331
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-017 MIL-G-22050 GRADE 1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.667 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.0625 INCHES NOMINAL IN
•
MATERIAL: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
•
OUTSIDE DIAMETER: 0.816 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CENTER HOLE DIAMETER0.667 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.0625 INCHES NOMINAL IN
MATERIALRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
OUTSIDE DIAMETER0.816 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
04052333005791InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
M83248/1-017InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
ARP568-017MILR2 5897 CL1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
101A905U01InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AS568-017InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
A6689.017.303InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-017 MIL-G-22050 GRADE 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-017 MIL-G-22050 GRADE 1?
AS568-017 MIL-G-22050 GRADE 1 is a O-RING.
What parts can replace AS568-017 MIL-G-22050 GRADE 1?
There are 21 known substitutes for AS568-017 MIL-G-22050 GRADE 1: 04052333005791, M83248/1-017, ARP568-017MILR2 5897 CL1 and 18 more. Substitute compatibility should be verified for your specific system.
Is AS568-017 MIL-G-22050 GRADE 1 still available?
AS568-017 MIL-G-22050 GRADE 1 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-017 MIL-G-22050 GRADE 1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026