PartsTable
Technical Data Sheet

M83248/1-017 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M83248/1-017: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC FLUOROCARBON, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, special_features: COMMONLY USED IN GASOLINE; JET ENGINE LUBRICANT; STATIC AND DYNAMIC SEAL, center_hole_diameter: 0.687 INCHES NOMINAL IN, cross-sectional_height: 0.062 INCHES NOMINAL IN, material_document_and_classification: MIL-R-83298 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-0993, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/1-017
NSN: 5331-00-166-0993
NIINs: 001660993, 013856370, 015692554
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialPLASTIC FLUOROCARBON
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
special_featuresCOMMONLY USED IN GASOLINE; JET ENGINE LUBRICANT; STATIC AND DYNAMIC SEAL
center_hole_diameter0.687 INCHES NOMINAL IN
cross-sectional_height0.062 INCHES NOMINAL IN
material_document_and_classificationMIL-R-83298 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5331-00-166-0993
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/1-017 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.801 INCHES MINIMUM AND 0.831 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.667 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.801 INCHES MINIMUM AND 0.831 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.667 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 9
04052333005791Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ARP568-017MILR2 5897 CL1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
6226BReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
J221P017Reference document
Same NSN cross-reference
Reference document — Secondary reference
818548-017Reference document
Same NSN cross-reference
Reference document — Secondary reference
364-29266PIECEReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy M83248/1-017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/1-017?
M83248/1-017 is a O-RING.
What parts can replace M83248/1-017?
There are 9 known substitutes for M83248/1-017: 04052333005791, ARP568-017MILR2 5897 CL1, 6226B and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248/1-017?
M83248/1-017 is cataloged in the U.S. Government catalog under NSN 5331-00-166-0993. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/1-017