PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-013AMS727 0F
AS568-013AMS727 0F ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.566 INCHES NOMINAL IN, center_hole_diameter: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-070-4836, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-013AMS727 0F
NSN: 5331-01-070-4836
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter0.566 INCHES NOMINAL IN
center_hole_diameter0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-01-070-4836
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-013AMS727 0F MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 0.566 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER0.566 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
C10096-0060-0013Interchangeable
interchangeable cross-reference
interchangeable
AS568-013Interchangeable
interchangeable cross-reference
interchangeable
AMS3303-013ESInterchangeable
interchangeable cross-reference
interchangeable
M83248/1-011Interchangeable
interchangeable cross-reference
interchangeable
10017039Interchangeable
interchangeable cross-reference
interchangeable
10017001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-013AMS727 0F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-013AMS727 0F?
AS568-013AMS727 0F is a O-RING.
What parts can replace AS568-013AMS727 0F?
There are 26 known substitutes for AS568-013AMS727 0F: C10096-0060-0013, AS568-013, AMS3303-013ES and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS568-013AMS727 0F?
AS568-013AMS727 0F is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-070-4836. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-013AMS727 0F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026