PartsTable
Technical Data Sheet
Download PDF

AS5178K04 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AS5178K04: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 347 OVERALL, nut_style: HEXAGON, nut_height: 0.250 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-202-6976, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS5178K04
NSN: 5310-00-202-6976
FSC: 5310 — Nuts and Washers
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP 347 OVERALL
nut_styleHEXAGON
nut_height0.250 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.688 INCHES NOMINAL IN
nominal_thread_size0.438 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch20
NSN5310-00-202-6976
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AS5178K04 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.688 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
NUT HEIGHT: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.688 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
NUT HEIGHT0.250 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEHEXAGON
THREAD CLASS3B
END ITEM IDENTIFICATIONW/S:ENGINE, AIRCRAFT, F100-PW0100 (F-15A/B/C/D); HELICOIPTER, CARRIER BASED ASW, SH-60F; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); AH-64-D LONGBOW; HELICOPTER, USCG SEARCH AND RESCUE, HH-60J; ENGINE, AIRCRAFT, F-108 (CFM-56, KC-135A); TORPEDO SYSTEMS, MK 46; HELICOPTER, SEARCH AND RESCUE, HH-60H; HELICOPTER, MH-53E; DEEP SUBMERGENCE SYSTEMS PROGRAMS (DSSP) A
THREAD QUANTITY PER INCH20
SUBSTITUTES & CROSS-REFERENCES 4
CE924-4SSReference document
Same NSN cross-reference
Reference document — Secondary reference
AN924-4SSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN924-4JReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AN924-4KReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AS5178K04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS5178K04?
AS5178K04 is a NUT,PLAIN,HEXAGON.
What parts can replace AS5178K04?
There are 4 known substitutes for AS5178K04: CE924-4SS, AN924-4S, AN924-4J and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS5178K04?
AS5178K04 is cataloged in the U.S. Government catalog under NSN 5310-00-202-6976. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS5178K04