PartsTable
Technical Data Sheet
Download PDF

AN924-4J — NUT,BLKD-HEX,AIRCRA

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AN924-4J: NUT,BLKD-HEX,AIRCRA.

The NUT,BLKD-HEX,AIRCRA is a the manufacturer industrial component. Key specifications include material: STEEL COMP 347 OVERALL, nut_style: HEXAGON, nut_height: 0.250 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-079-1967, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN924-4J
NSN: 5310-00-079-1967
NIINs: 000791967, 002026976, 014638904
FSC: 5310 — Nuts and Washers
CAGE: A0189 — BAYKAR PIAGGIO AEROSPACE S.P.A. (ITA)
SPECIFICATIONS
materialSTEEL COMP 347 OVERALL
nut_styleHEXAGON
nut_height0.250 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.688 INCHES NOMINAL IN
nominal_thread_size0.438 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch20
NSN5310-00-079-1967
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AN924-4J · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.684 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
NUT HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.684 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
NUT HEIGHT0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEHEXAGON
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 7
AN924J4Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL0150268Reference document
Same NSN cross-reference
Reference document — Informative reference only
AN924-4CReference document
Same NSN cross-reference
Reference document — Secondary reference
8805912Reference document
Same NSN cross-reference
Reference document — Secondary reference
10087975Reference document
Same NSN cross-reference
Reference document — Informative reference only
SAE AS5178J04Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AN924-4J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN924-4J?
AN924-4J is a NUT,BLKD-HEX,AIRCRA.
What parts can replace AN924-4J?
There are 7 known substitutes for AN924-4J: AN924J4, 5310PL0150268, AN924-4C and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN924-4J?
AN924-4J is cataloged in the U.S. Government catalog under NSN 5310-00-079-1967. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN924-4J

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.