AS3209-154 — PACKING,PREFORMED,A

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS3209-154: PACKING,PREFORMED,A.

The PACKING,PREFORMED,A is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.943 INCHES NOMINAL IN, center_hole_diameter: 3.709 INCHES MINIMUM AND 3.765 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-103-1775, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS3209-154

NSN: 5331-00-103-1775
NIINs: 001031775, 014638838, 015818092
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
temp_rating	-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	3.943 INCHES NOMINAL IN
center_hole_diameter	3.709 INCHES MINIMUM AND 3.765 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-00-103-1775

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 3.943 INCHES NOMINAL IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 3.709 INCHES MINIMUM AND 3.765 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	3.943 INCHES NOMINAL IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	3.709 INCHES MINIMUM AND 3.765 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 4

ST3001-154Reference document

Same NSN cross-reference

Reference document — Secondary reference

5331PL0140119Reference document

Same NSN cross-reference

Reference document — Informative reference only

SAE-AMS7276Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

10117046Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy AS3209-154?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS3209-154?

AS3209-154 is a PACKING,PREFORMED,A.

What parts can replace AS3209-154?

There are 4 known substitutes for AS3209-154: ST3001-154, 5331PL0140119, SAE-AMS7276 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS3209-154?

AS3209-154 is cataloged in the U.S. Government catalog under NSN 5331-00-103-1775. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS3209-154 — PACKING,PREFORMED,A

Request a Quote — AS3209-154