PartsTable
Technical Data Sheet
PartsTable / O-RING / AS3209-024
AS3209-024 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, end_item_identification: AIRCRAFT ENGINE AE2100D3, KC130J, criticality_code_justification: AGAV. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-298-7221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS3209-024
NSN: 5331-01-298-7221
FSC: 5331 — O-RING
CAGE: 63005 — ROLLS-ROYCE CORPORATION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationAIRCRAFT ENGINE AE2100D3, KC130J
criticality_code_justificationAGAV
material_document_and_classificationSAE AMS7276 ASSN STD SINGLE MATERIAL RESPONSE OR SAE AMS7280 ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agency(INAVY)PACKING,AIRCRAFT,MA
NSN5331-01-298-7221
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS3209-024 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7276 FED SPEC ALL MATERIAL RESPONSES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
OUTSIDE DIAMETER: 1.171 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 7276 FED SPEC ALL MATERIAL RESPONSES
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING
OUTSIDE DIAMETER1.171 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
AS3085-024Interchangeable
interchangeable cross-reference
interchangeable
AS3209-024Interchangeable
interchangeable cross-reference
interchangeable
10335257Interchangeable
Same NIIN cross-reference
interchangeable
946.91.27.724Interchangeable
Same NIIN cross-reference
interchangeable
9469127724Interchangeable
Same NIIN cross-reference
interchangeable
SAE-AMS7276Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS3209-024?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS3209-024?
AS3209-024 is a O-RING.
What parts can replace AS3209-024?
There are 6 known substitutes for AS3209-024: AS3085-024, AS3209-024, 10335257 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS3209-024?
AS3209-024 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-298-7221. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS3209-024

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026