AS3209-001 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS3209-001: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, center_hole_diameter: 0.023 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-010-3367, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS3209-001

NSN: 5331-01-010-3367
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
center_hole_diameter	0.023 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
NSN	5331-01-010-3367

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.023 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.023 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 6

M83248/1-001Reference document

Same NSN cross-reference

Reference document — Secondary reference

2-001V1164-75Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MIL-R-83248/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS83248/1Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

M83248-1-001ESReference document

Same NSN cross-reference

Reference document — Secondary reference

2-001V0747-75Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS3209-001?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS3209-001?

AS3209-001 is a O-RING.

What parts can replace AS3209-001?

There are 6 known substitutes for AS3209-001: M83248/1-001, 2-001V1164-75, MIL-R-83248/1 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS3209-001?

AS3209-001 is cataloged in the U.S. Government catalog under NSN 5331-01-010-3367. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS3209-001 — O-RING

Request a Quote — AS3209-001