PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS24461-5
AS24461-5 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, bore_diameter: 0.3125 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.4370 INCHES NOMINAL IN, outer_ring_width: 0.3440 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2801, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS24461-5
NSN: 3110-00-227-2801
FSC: 3110
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialSTEEL COMP E50100 OR STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
bore_diameter0.3125 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.4370 INCHES NOMINAL IN
outer_ring_width0.3440 INCHES NOMINAL IN
special_featuresOIL HOLE AND OIL GROOVE IN OUTER RING
style_designatorAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter0.8125 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-227-2801
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AS24461-5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER RING WIDTH: 0.4370 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3440 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESOIL HOLE AND OIL GROOVE IN OUTER RING
INNER RING WIDTH0.4370 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3440 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER0.8125 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
AS24461Interchangeable
interchangeable cross-reference
interchangeable
505-20Interchangeable
interchangeable cross-reference
interchangeable
MS24461-20Interchangeable
interchangeable cross-reference
interchangeable
3NBC511ZPInterchangeable
interchangeable cross-reference
interchangeable
505-3Interchangeable
interchangeable cross-reference
interchangeable
MS24461-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS24461-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS24461-5?
AS24461-5 is a BEARING,ROLLER,NEEDLE.
What parts can replace AS24461-5?
There are 35 known substitutes for AS24461-5: AS24461, 505-20, MS24461-20 and 32 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS24461-5?
AS24461-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2801. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS24461-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026