PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24461-3
MS24461-3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.1900 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.3125 INCHES NOMINAL IN, outer_ring_width: 0.2187 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2799, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24461-3
NSN: 3110-00-227-2799
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.1900 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.3125 INCHES NOMINAL IN
outer_ring_width0.2187 INCHES NOMINAL IN
special_featuresOIL HOLE AND GROOVE IN OUTER RING
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
overall_outside_diameter0.6875 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-227-2799
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS24461-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 0.6875 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
SURFACE FINISH: GROUND
•
OUTER RING WIDTH: 0.2187 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
•
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER0.6875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
SURFACE FINISHGROUND
OUTER RING WIDTH0.2187 INCHES NOMINAL IN
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
MATERIALSTEEL OVERALL
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER RING
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
75453Interchangeable
interchangeable cross-reference
interchangeable
5053-50-SSInterchangeable
interchangeable cross-reference
interchangeable
803-5001740-4 PC NO 211Interchangeable
interchangeable cross-reference
interchangeable
505-3Interchangeable
interchangeable cross-reference
interchangeable
579R491H02Interchangeable
interchangeable cross-reference
interchangeable
AS24461Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24461-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24461-3?
MS24461-3 is a BEARING,ROLLER,NEEDLE.
What parts can replace MS24461-3?
There are 26 known substitutes for MS24461-3: 75453, 5053-50-SS, 803-5001740-4 PC NO 211 and 23 more. Substitute compatibility should be verified for your specific system.
Is MS24461-3 still available?
MS24461-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24461-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026