AS21919WDG31Y — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS21919WDG31Y: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, lug_hole_diameter: 0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN, material_thickness: 0.062 INCHES NOMINAL IN, loop_inside_diameter: 1.923 INCHES MINIMUM AND 1.953 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-690-0695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS21919WDG31Y

NSN: 5340-01-690-0695
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER CHLOROPRENE CLASS CR CUSHION
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
lug_hole_diameter	0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
material_thickness	0.062 INCHES NOMINAL IN
loop_inside_diameter	1.923 INCHES MINIMUM AND 1.953 INCHES MAXIMUM IN
end_item_identification	1520-01-082-0686
material_document_and_classification	AMS-QQ-250/5 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.672 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	1.453 INCHES MINIMUM AND 1.483 INCHES MAXIMUM IN
NSN	5340-01-690-0695

COMPONENT DIAGRAM

KEY FEATURES

•

LUG HOLE DIAMETER: 0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION

•

MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.672 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

LUG HOLE DIAMETER	0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-250/5 ASSN STD SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.062 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.672 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN
END ITEM IDENTIFICATION	1520-01-082-0686
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.453 INCHES MINIMUM AND 1.483 INCHES MAXIMUM IN
MATERIAL	ALUMINUM ALLOY 2024 BAND

SUBSTITUTES & CROSS-REFERENCES 4

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AS21919C1Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

C8603ANDTYPE4ANDCLASSAReference document

Same NSN cross-reference

Reference document — Secondary reference

MS21919DG31Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy AS21919WDG31Y?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS21919WDG31Y?

AS21919WDG31Y is a CLAMP,LOOP.

What parts can replace AS21919WDG31Y?

There are 4 known substitutes for AS21919WDG31Y: SAE-AS21919, AS21919C1, C8603ANDTYPE4ANDCLASSA and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS21919WDG31Y?

AS21919WDG31Y is cataloged in the U.S. Government catalog under NSN 5340-01-690-0695. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS21919WDG31Y — CLAMP,LOOP

Request a Quote — AS21919WDG31Y