MS21919DG31 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MS21919DG31: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, lug_hole_diameter: 0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN, material_thickness: 0.062 INCHES NOMINAL IN, loop_inside_diameter: 1.923 INCHES MINIMUM AND 1.953 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-598-0239, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS21919DG31

NSN: 5340-00-598-0239
NIINs: 005980239, 006554759, 016900695
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER CHLOROPRENE CLASS CR CUSHION
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
lug_hole_diameter	0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
material_thickness	0.062 INCHES NOMINAL IN
loop_inside_diameter	1.923 INCHES MINIMUM AND 1.953 INCHES MAXIMUM IN
end_item_identification	1520-01-082-0686
material_document_and_classification	AMS-QQ-250/5 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.672 INCHES MINIMUM AND 1.702 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	1.453 INCHES MINIMUM AND 1.483 INCHES MAXIMUM IN
NSN	5340-00-598-0239

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.610 INCHES NOMINAL IN

•

NONDEFINITIVE SPEC/STD DATA: 4 TYPE AND A CLASS

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.392 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.656 INCHES NOMINAL IN
MATERIAL THICKNESS	0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.610 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA	4 TYPE AND A CLASS
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.392 INCHES NOMINAL IN
MATERIAL	RUBBER CUSHION
MATERIAL	ALUMINUM BAND

SUBSTITUTES & CROSS-REFERENCES 1

C8603ANDTYPE4ANDCLASSAReference document

Same NSN cross-reference

Reference document — Identification reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MS21919DG31?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS21919DG31?

MS21919DG31 is a CLAMP,LOOP.

What parts can replace MS21919DG31?

There is 1 known substitute for MS21919DG31: C8603ANDTYPE4ANDCLASSA. Substitute compatibility should be verified for your specific system.

What is the NSN for MS21919DG31?

MS21919DG31 is cataloged in the U.S. Government catalog under NSN 5340-00-598-0239. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS21919DG31 — CLAMP,LOOP

Request a Quote — MS21919DG31